2000 - DETECTORs - Ion.Chambers (Series 2000)
2100 - Ion.Chambers - Reference Class
- FARMER Type ICs 0.6ccm
show product details hide product details   MR 2101 - PRECISE IONIZATION CHAMBER 0.6 cm3
» Farmer-type with graphite walls (NE2571 equivalent)
PRECISE  IONIZATION  CHAMBER   0.6 cm3 HTML product sheet PDF product sheet

Farmer-type Ionization Chamber with graphite walls, aluminium central electrode, vented, PMMA built-up cap, full-guarded, 2m low-noise cable, connector BNT (other type on request). Because of its excellent long-term stability and flat energy dependance, the chamber can be used as a part of REFERENCE DOSEMETER for transfer of dosimetry units from the SSDL.

For measurement in water phantom the rubber sheath MR 2911 is necessary.

 Kerma/Dose rate:   ( 0.001 ÷ 10 ) Gy/min
 Bias Voltage @CE :   max. ± 500 V, nominal +250V
 Nominal sensitivity:   4.6 e7 Gy/C ± 1 % @ Co-60 Dose    
 Leakage curren:   max. ± 5 fA (± 0.00001 Gy/min)
 Long-term stability:   < 0.2 % per year

 

show product details hide product details   MR 2102 - PRECISE IONIZATION CHAMBER 0.6 cm3 - WATERTIGHT VENTED
» Farmer-type with graphite walls (NE2571 equivalent)
PRECISE  IONIZATION  CHAMBER  0.6 cm3  -  WATERTIGHT VENTED

MR 2102 is the watertight version of precision ionization chamber MR 2101.

The internal design of the ion.chamber body icluding the sensitive volume is identical with the MR 2101. The only difference is that the cable is going through the tube to enable free ventilation to the outer atmosphere.

MR 2102  is delivered with two caps :
The first one for measurement free in air is indentical to MR 2101 buid-up cap.
The second one for measurement in water is sealed with o-ring to the chamber body and the thickness at the sensitive volume is 1mm only.

 

2200 - Ion.Chambers - Routine Class
show product details hide product details COMING SOON    MR 2201 - Routine IONIZATION CHAMBER 0.3 ccm - VENTED
Routine IONIZATION CHAMBER 0.3 ccm  -  VENTED

TBD

show product details hide product details NEW    MR 2202 - Routine IONIZATION CHAMBER 0.3 ccm - WATERTIGHT VENTED
Routine IONIZATION CHAMBER 0.3 ccm - WATERTIGHT VENTED

TBD

show product details hide product details NEW    MR 2203 - Routine IONIZATION CHAMBER 0.3 ccm - WATERTIGHT Semi-Hermetized
Routine IONIZATION CHAMBER 0.3 ccm - WATERTIGHT Semi-Hermetized

TBD

2800 - Check Sources
show product details hide product details ON  REQUEST  MR 2802 - Check Source Sr-90  (80MBq)
» for the long-term stability tests of thimble ionization chambers
Check Source Sr-90  (80MBq) HTML product sheet

Check source MR 2802 is to be used for verification of the long-term stability of ionization chamber sensitivity.

Ionization chamber is placed inside the check source shielding container by means of the exchangeable adapter MR 2802A-*. This design makes possible to use the MR 2802 check source for various ionization chambers, while using an appropriate adapter. There is only one limitation - the outer diameter of the chamber must be smaller then 13 mm.

2900 - Accessory
show product details hide product details MR 2911 - RUBBER SLEEVEs for Farmer-type Ion.Chambers
RUBBER SLEEVEs for Farmer-type Ion.Chambers

Made from  ' caoutchouc ' ( natural rubber at wiki)

Thikness :   0.1÷0.2 mm

show product details hide product details         MR 292* / *-* -* - Extension Cables
» Low-Noise Triaxial or Coaxial
Extension Cables

Various Extension Cables for Ion.Chambers (triaxial) and for Diode Detectors (coaxial), free or on a Reel

See MR 293* /*-* for all available connectors

Standard length is 10m. Other length from range <1÷100>m on request. 

show product details hide product details         MR 293* / *-* - Cable Adapters
» for interconnetion detectors and electrometers with different connectors
Cable Adapters

Various low-noise Cable Adapters available for connection of any ionization detector to any electrometer.

 STANDARD connector types ( male / female ) :

 "BNT   Bayonet coNnector Triaxial
  used as standard connector in all MINIRAD products
 "TNT"   Thread coNnector Triaxial
  possible on request in all MINIRAD products 
 "BNC"   Bayonet coNnector Coaxial
  used as standard connector in all MINIRAD products 
 "TNC"   Thread coNnector Coaxial
  possible on request in all MINIRAD products 

SPECIAL connector types ( male / female ) :

 "B3NT"   3-slot / 3-lug ( male / female ) BNT
  used by Keithley company 
 "PTW-M"   connectors “M“ used by PTW company 
 "mQ"   connectors miniQuick used by NE company 
 "PET"   connectors formerly used by NE company 

separated high-voltage input to / output from adapter beside the signal connector :

 cable with banana plug
 coax.cable w. coax.connector (BNC,SHV,UHF,LEMO... )

Standard length is 25cm.  Other length on request.